Help
Readings
Everything here is public, so an answer written once helps everyone who hits the same problem.
-
Two monitors in similar beds show different numbers
That is normal and correct. Each is calibrated to its own soil, and even nearby beds hold water differently. The percentage is meaningful within ...
0 answers
Answered
-
What do the status words OK, getting dry and needs watering mean
They are a plain reading of the moisture level against the watering point set for your plant. OK means there is plenty of moisture, ...
0 answers
Answered
-
Can the reading go below 0 or above 100
The scale is set by your calibration, so if the soil gets drier than your dry point or wetter than your wet point, the ...
0 answers
Answered
-
The reading jumps around by a few percent, is that normal
A little movement is completely normal. Soil moisture genuinely shifts as water moves through the ground, and electronics always have a touch of noise. ...
0 answers
Answered
-
How often does the reading update
Your Plugin monitor checks the soil every few seconds, so the reading in the app is live whenever you’re home. It reports to the ...
0 answers
Answered
-
Where can I see the history of my readings
If you use the cloud, your account shows a history graph for each monitor, over the last few hours, day or week. In Home ...
0 answers
Answered
-
The soil looks dry but the reading says the bed is fine
The surface almost always dries first while the soil lower down, where the roots are, stays damp. The probe reads at root depth, which ...
0 answers
Answered
-
Should I watch the number or the trend
The trend tells you more than any single number. A reading of fifty means little on its own, but fifty and falling steadily tells ...
0 answers
Answered
-
Do cold or hot conditions affect readings
Temperature can nudge soil readings a little, and very cold ground behaves differently as it approaches freezing. For everyday gardening this is minor. If ...
0 answers
Answered
-
The reading shot up after rain, then fell, is that right
Yes, that is exactly what you want to see. Rain wets the soil, the reading rises, then as the water drains and the plant ...
0 answers
Answered
-
My monitor reads 100 percent in dry soil, what have I done wrong
This normally means calibration is off, often the wet point was set too high, or the monitor is not calibrated yet. Recalibrate, setting the ...
0 answers
Answered
-
My monitor reads 0 percent even in wet soil
Usually a calibration or connection issue. Check the probe is pushed properly into the soil and the lead is firmly connected at both ends. ...
0 answers
Answered
-
Pinned
What does the moisture percentage mean
It is where your soil sits between the dry point and wet point you set during calibration. Nought means as dry as your dry ...
0 answers
Answered
Ask a question
Sign in to post a question. Answers stay public so the next person with the same problem finds them.